hydrofluosilicic acid
chemical reaction: H2SiF6
formula weigh: 144.092
CAS NO: 16961-83-4
EINECSNO: 241-034-8
Melting point : -20 to -17 ºC
Boiling point : 108 to 109 ºC
Water soluble : soluble
Density : 1.22 g/cm³
Surface: Colorless transparent liquid
Security description:
:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
:Take off immediately all contaminated clothing.
:Wear suitable protective clothing, gloves and eye/face protection.
:In case of accident or if you feel unwell, seek medical advice immediately (show the lable where possible).
Dangerous description: Causes burns.
Solubility:water-soluble
chemical property:
Fluorosilicic acid is a coordination acid, very acidic 0.03mol/L concentration of pH 1.6 (regardless of decomposition, acidity and nitric acid similar), if stored in plastic containers, stable in dilute solution at room temperature, the complex ion fluorosilicate root (SiF62-) is very stable, the presence of six F and a very symmetrical structure makes the negative charge can be very well dispersed, so that the fluorosilicic acid can be very good to release the Hydrogen ions, its salts have special solubility, potassium and barium salts are insoluble, rubidium salts are slightly soluble, sodium, lithium and ammonium salts are soluble, cesium salts, ferrous salts are extremely soluble. Heat decomposition releases toxic fluoride gas. It has strong corrosiveness.
1, It has the general property of an acid and reacts violently with metals to produce hydrogen:
H2SiF6+2Na→Na2SiF6+H2↑
H2SiF6+Mg→MgSiF6+H2↑
H2SiF6+Zn→ZnSiF6+H2↑
H2SiF6+Fe→FeSiF6+H2↑
2,React with the base to form a salt:
H2SiF6+2NaOH→Na2SiF6+2H2O
H2SiF6+Fe(OH)2→FeSiF6+2H2O
3,Fluorosilicate is hydrolyzed in hot water,
SiF62- + 3H2O = H2SiO3 + 2F-+ 4HF,
Therefore, the fluorosilicate is weakly acidic in the hot water
4,Can react with the metal oxides:
3H2SiF6+Fe2O3=Fe2(SiF6)3+3H2O
H2SiF6+CuO=CuSiF6+H2O
5,Redecomposition reaction with salt:
H2SiF6+Na2CO3→Na2SiF6+CO2↑+H2O
H2SiF6+K2SO4→K2SiF6↓+H2SO4
H2SiF6+2KMnO4→K2SiF6↓+2HMnO4(A lower concentration of permanganate can be made by this method,Chemically stable)
H2SiF6+2KI→K2SiF6↓+2HI(Since fluorosilicic acid is a non-oxidizing acid with no side reactions, hydriodic acid contains very little free iodine and the solution is basically colorless)
Uses:
Mainly used as raw material for the preparation of fluorosilicates and silicon tetrafluoride, also used in metal plating, wood preservation, beer sterilization, etc.
First aid measures
SKIN CONTACT: Remove contaminated clothing immediately and flush with plenty of running water for at least 15 minutes. Seek medical attention.
EYE CONTACT: Immediately lift eyelids and flush thoroughly with plenty of running water or saline for at least 15 minutes. Seek medical attention.
INHALATION: Remove quickly from scene to fresh air. Keep airway open. If breathing is difficult, administer oxygen. If breathing stops, administer artificial respiration immediately. Seek medical attention.
Fire-fighting measures
Hazardous combustion products: Hydrogen fluoride.
Extinguishing methods: Firefighters must wear full body acid and alkali resistant firefighting suits.
Extinguishing agents: Foam, dry powder, carbon dioxide, sand.
Emergency treatment of leakage
Rapidly evacuate personnel from the leaking contaminated area to a safe area and isolate them, strictly restricting access. It is recommended that emergency personnel wear self-contained positive-pressure respirators and anti-acid and alkali work clothes. Do not come into direct contact with the leak. Cut off the source of leakage as far as possible.
Small leaks: Adsorb or absorb with sand or other non-combustible materials. You can also flush with a large amount of water, dilute the wash water and put it into the wastewater system.
Large spills: Construct a dike or dig a pit to contain the spill. Cover with foam to reduce vapor hazard. Transfer to tanker or special collector by pump, recycle or transport to waste disposal site for disposal.
Operation precautions: closed operation, pay attention to ventilation. The operation should be mechanized and automated as far as possible. Operators must be specially trained and strictly follow the operating procedures. It is recommended that operators wear self-absorbing filtering gas masks (full face masks), rubberized acid and alkali resistant clothing, and rubberized acid and alkali resistant gloves. Keep away from flammable and combustible materials. Prevent vapors from leaking into the workplace air. Avoid contact with alkalis. Handle gently to prevent damage to packaging and containers. Equip with emergency equipment for leakage. Empty containers may retain hazardous materials.
Storage Precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat source. The storage temperature should not exceed 30ºC. Keep the container sealed. It should be stored separately from flammable materials and alkalis, and should not be mixed. The storage area should be equipped with leakage emergency treatment equipment and suitable shelter materials.
Reliable Hydrofluoric Acid Supplier in China
Reliable Fluorine Chemical Industry Supplier in China
![Fluorosilicic Acid Solution for Water Fluoridation and Industrial Applications](//www.micstatic.com/athena/img/transparent.png)
![Fluorosilicic Acid Solution for Water Fluoridation and Industrial Applications](//www.micstatic.com/athena/img/transparent.png)
Provide Anhydrous hydrogen fluoride,
49% electronic hydrofluoric acid ,
industrial hydrofluoric acid,
high purity hydrofluoric acid;
hydrofluosilicic acid
Accept customized orders
semiconductor fabrication&Stainless steel cleaning
Hydrofluoric acid is used to cleaning stainless steel & Semiconductor wafer
Graphite industry
Hydrofluoric acid is used in the graphite industry
Glass thinning
Hydrofluoric acid can corrode glass and is used in a variety of glass-thinning scenarios
Purify the high-purity quartz sand
Hydrofluoric acid can be used to pickling high purity quartz sand for further purification
Production of refrigerant
Anhydrous hydrogen fluoride is an important raw material for refrigerant production
Special hydrofluoric acid for the oil field
Hydrofluoric acid is also sometimes used when oil is being extracted
We have over 20 years of professional service experience in the fluorine chemical industry
![Fluorosilicic Acid Solution for Water Fluoridation and Industrial Applications](//www.micstatic.com/athena/img/transparent.png)
Quality Control
Customize products according to customer needs, can provide professional product quality testing,
Professional service team
We have a professional production team, quality team, logistics and transportation fleet and after-sales service team
High quality products
Multiple concentrations, multiple packaging specifications
Barket: 25 kg, 230 kg; liquid.
Canned: 1 ton, 1.15 tons; liquid state.
IBC Tank: 20 tons; liquid.
![Fluorosilicic Acid Solution for Water Fluoridation and Industrial Applications](//www.micstatic.com/athena/img/transparent.png)
Efficient logistics support
We have a professional fleet that can provide efficient logistics support
Long-term and stable supply
We have over 20 years of service experience in the fluorine chemical industry and can provide you with a long-term and stable supply